| MOBILE<\/th>\n<\/tr>\n | |
|---|---|
| Mobile Module<\/td>\n | 4G (LTE) \u2013 Cat 6 up to 300 Mbps, 3G \u2013 Up to 42 Mbps<\/td>\n<\/tr>\n |
| Status<\/td>\n | Signal strength, SINR, RSRP, RSRQ, Bytes sent\/received, connected band, carrier aggregation, IMSI, ICCID<\/td>\n<\/tr>\n |
| SMS<\/td>\n | SMS status, SMS configuration, send\/read SMS via HTTP POST\/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS, auto reply<\/td>\n<\/tr>\n |
| USSD<\/td>\n | Supports sending and reading Unstructured Supplementary Service Data messages<\/td>\n<\/tr>\n |
| Black\/Whiles list (planned)<\/td>\n | Operator black\/white list<\/td>\n<\/tr>\n |
| Multiple PDN<\/td>\n | Possibility to use different PDNs for multiple network access and services<\/td>\n<\/tr>\n |
| Band management<\/td>\n | Band lock, Used band status display<\/td>\n<\/tr>\n |
| APN<\/td>\n | Auto APN<\/td>\n<\/tr>\n |
| Bridge mode<\/td>\n | Direct connection (bridge) between mobile ISP and device on LAN<\/td>\n<\/tr>\n |
| WIRELESS<\/th>\n<\/tr>\n | |
| Wireless mode<\/td>\n | 802.11 b\/g\/n, 2×2 MIMO, Access Point (AP), Station (STA)<\/td>\n<\/tr>\n |
| WiFi security<\/td>\n | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation<\/td>\n<\/tr>\n |
| ESSID<\/td>\n | ESSID stealth mode<\/td>\n<\/tr>\n |
| Wireless Hotspot<\/td>\n | Captive portal (Hotspot), internal\/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden<\/td>\n<\/tr>\n |
| ETHERNET<\/th>\n<\/tr>\n | |
| WAN<\/td>\n | 1 x WAN port (can be configured as LAN) 10\/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto \nMDI\/MDIX crossover<\/td>\n<\/tr>\n |
| LAN<\/td>\n | 1 x LAN ports, 10\/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI\/MDIX crossover<\/td>\n<\/tr>\n |
| NETWORK<\/th>\n<\/tr>\n | |
| Routing<\/td>\n | Static routes, Dynamic routes (planned)<\/td>\n<\/tr>\n |
| VoIP passthrough support<\/td>\n | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets<\/td>\n<\/tr>\n |
| Network protocols<\/td>\n | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned)<\/td>\n<\/tr>\n |
| Connection monitoring<\/td>\n | Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection<\/td>\n<\/tr>\n |
| Firewall<\/td>\n | Port forwards, traffic rules, NAT rules, custom rules<\/td>\n<\/tr>\n |
| DHCP<\/td>\n | Static and dynamic IP allocation, DHCP Relay, Relayd<\/td>\n<\/tr>\n |
| QoS \/ Smart Queue Management (SQM) (planned)<\/td>\n | Traffic priority queuing by source\/destination, service, protocol or port, WMM, 802.11e<\/td>\n<\/tr>\n |
| DDNS (planned)<\/td>\n | Supported >25 service providers, others can be configured manually<\/td>\n<\/tr>\n |
| Network backup<\/td>\n | Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover<\/td>\n<\/tr>\n |
| Load balancing<\/td>\n | Balance Internet traffic over multiple WAN connections<\/td>\n<\/tr>\n |
| SSHFS (optional)<\/td>\n | Possibility to mount remote file system via SSH protocol (not available in standard FW)<\/td>\n<\/tr>\n |
| SECURITY<\/th>\n<\/tr>\n | |
| Authetication<\/td>\n | Pre-shared key, digital certificates, X.509 certificates<\/td>\n<\/tr>\n |
| Firewall<\/td>\n | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T<\/td>\n<\/tr>\n |
| Attack prevention<\/td>\n | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP\/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)<\/td>\n<\/tr>\n |
| VLAN<\/td>\n | Tag based VLAN separation<\/td>\n<\/tr>\n |
| Mobile quota control<\/td>\n | Custom data limits for both SIM cards<\/td>\n<\/tr>\n |
| WEB filter (planned)<\/td>\n | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only<\/td>\n<\/tr>\n |
| Access control<\/td>\n | Flexible access control of TCP, UDP, ICMP packets, MAC address filter<\/td>\n<\/tr>\n |
| VPN<\/th>\n<\/tr>\n | |
| OpenVPN<\/td>\n | Multiple clients and a server can run simultaneously, 12 encryption methods<\/td>\n<\/tr>\n |
| OpenVPN Encryption<\/td>\n | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC<\/td>\n<\/tr>\n |
| IPSec<\/td>\n | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)<\/td>\n<\/tr>\n |
| GRE<\/td>\n | GRE tunnel<\/td>\n<\/tr>\n |
| PPTP, L2TP<\/td>\n | Client\/Server instances can run simultaneously, L2TPv3 support (planned)<\/td>\n<\/tr>\n |
| Stunnel (planned)<\/td>\n | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program\u2019s code<\/td>\n<\/tr>\n |
| DMVPN (planned)<\/td>\n | Method of building scalable IPsec VPNs<\/td>\n<\/tr>\n |
| SSTP (planned)<\/td>\n | SSTP client instance support<\/td>\n<\/tr>\n |
| ZeroTier<\/td>\n | ZeroTier VPN client support<\/td>\n<\/tr>\n |
| WireGuard<\/td>\n | WireGuard VPN client and server support<\/td>\n<\/tr>\n |
| MODBUS TCP SLAVE (PLANNED)<\/th>\n<\/tr>\n | |
| ID filtering<\/td>\n | Respond to one ID in range [1;255] or any<\/td>\n<\/tr>\n |
| Allow remote access<\/td>\n | Allow access through WAN<\/td>\n<\/tr>\n |
| Custom registers<\/td>\n | Modbus TCP custom register block, which allows to read\/write to a file inside the router, and can be used to extend Modbus TCP slave functionality<\/td>\n<\/tr>\n |
| MODBUS TCP MASTER (PLANNED)<\/th>\n<\/tr>\n | |
| Supported functions<\/td>\n | 01, 02, 03, 04, 05, 06, 15, 16<\/td>\n<\/tr>\n |
| Supported data formats<\/td>\n | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII<\/td>\n<\/tr>\n |
| MQTT GATEWAY (PLANNED)<\/th>\n<\/tr>\n | |
| Gateway<\/td>\n | Allows sending commands and receiving data from Modbus Master trough MQTT broker<\/td>\n<\/tr>\n |
| DATA TO SERVER (PLANNED)<\/th>\n<\/tr>\n | |
| Protocols<\/td>\n | HTTP(S), MQTT, Azure MQTT, Kinesis<\/td>\n<\/tr>\n |
| MONITORING & MANAGEMENT<\/th>\n<\/tr>\n | |
| WEB UI<\/td>\n | HTTP\/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log<\/td>\n<\/tr>\n |
| FOTA<\/td>\n | Firmware update from server, automatic notification<\/td>\n<\/tr>\n |
| SSH<\/td>\n | SSH (v1, v2)<\/td>\n<\/tr>\n |
| SMS<\/td>\n | SMS status, SMS configuration, send\/read SMS via HTTP POST\/GET<\/td>\n<\/tr>\n |
| CALL<\/td>\n | Reboot, Status, Mobile data on\/off, Output on\/off<\/td>\n<\/tr>\n |
| MQTT (planned)<\/td>\n | MQTT Broker, MQTT publisher<\/td>\n<\/tr>\n |
| SNMP (planned)<\/td>\n | SNMP (v1, v2, v3), SNMP trap<\/td>\n<\/tr>\n |
| JSON-RPC<\/td>\n | Management API over HTTP\/HTTPS<\/td>\n<\/tr>\n |
| Modbus (planned)<\/td>\n | Modbus TCP status\/control<\/td>\n<\/tr>\n |
| RMS<\/td>\n | Teltonika Remote Management System (RMS)<\/td>\n<\/tr>\n |
| IoT PLATFORMS<\/th>\n<\/tr>\n | |
| Clouds of things<\/td>\n | Allows monitoring of: Device data, Mobile data, Network info, Availability<\/td>\n<\/tr>\n |
| ThingWorx<\/td>\n | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type<\/td>\n<\/tr>\n |
| Cumulocity<\/td>\n | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP<\/td>\n<\/tr>\n |
| Azure IoT Hub<\/td>\n | Can send device IP, Number of bytes send\/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC\/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server<\/td>\n<\/tr>\n |
| SYSTEM CHARACTERISTICS<\/th>\n<\/tr>\n | |
| CPU<\/td>\n | QCA9531, MIPS 24kc, 650 Mhz<\/td>\n<\/tr>\n |
| RAM<\/td>\n | 128 MB, DDR2<\/td>\n<\/tr>\n |
| FLASH storage<\/td>\n | 16 MB, SPI Flash (Optional up to 256 MB)<\/td>\n<\/tr>\n |
| FIRMWARE \/ CONFIGURATION<\/th>\n<\/tr>\n | |
| WEB UI<\/td>\n | Update FW from file, check FW on server, configuration profiles, configuration backup<\/td>\n<\/tr>\n |
| FOTA<\/td>\n | Update FW\/configuration from server<\/td>\n<\/tr>\n |
| RMS<\/td>\n | Update FW\/configuration for multiple devices at once<\/td>\n<\/tr>\n |
| Keep settings<\/td>\n | Update FW without losing current configuration<\/td>\n<\/tr>\n |
| INPUT\/OUTPUT<\/th>\n<\/tr>\n | |
| Configurable I\/O<\/td>\n | 2 x Configurable digital Inputs\/Outputs. Digital input 0 – 6 V detected as logic low, 8 – 30 V detected as logic high. Open collector output, max output 30 V, 300 mA<\/td>\n<\/tr>\n |
| Events<\/td>\n | SMS, Email, RMS<\/td>\n<\/tr>\n |
| POWER<\/th>\n<\/tr>\n | |
| Connector<\/td>\n | 4 pin industrial DC power socket<\/td>\n<\/tr>\n |
| Input voltage range<\/td>\n | 9 – 30 VDC, reverse polarity protection, voltage surge\/transient protection<\/td>\n<\/tr>\n |
| Power consumption<\/td>\n | 10.5W max<\/td>\n<\/tr>\n |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)<\/th>\n<\/tr>\n | |
| Ethernet<\/td>\n | 2 x RJ45 ports, 10\/100 Mbps<\/td>\n<\/tr>\n |
| I\/Os<\/td>\n | 2 x Configurable digital Inputs\/Outputs on 4 pin power connector<\/td>\n<\/tr>\n |
| Status LEDs<\/td>\n | 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power<\/td>\n<\/tr>\n |
| SIM<\/td>\n | 1 x SIM slots (Mini SIM – 2FF), 1.8 V\/3 V, external SIM holders<\/td>\n<\/tr>\n |
| Antenna<\/td>\n | 2 x SMA for LTE, 2 x RP-SMA for WiFi<\/td>\n<\/tr>\n |
| Power<\/td>\n | 1 x 4 pin DC connector<\/td>\n<\/tr>\n |
| Reset<\/td>\n | Reboot\/User default reset\/Factory reset button<\/td>\n<\/tr>\n |
| PHYSICAL SPECIFICATION<\/th>\n<\/tr>\n | |
| Casing material<\/td>\n | Aluminium housing with DIN rail mounting option<\/td>\n<\/tr>\n |
| Dimensions (W x H x D)<\/td>\n | 100 x 30 x 85 mm<\/td>\n<\/tr>\n |
| Weight<\/td>\n | 247g<\/td>\n<\/tr>\n |
| Mounting options<\/td>\n | DIN rail, flat surface placement<\/td>\n<\/tr>\n |
| OPERATING ENVIRONMENT<\/th>\n<\/tr>\n | |
| Operating temperature<\/td>\n | -40 C to 75 C<\/td>\n<\/tr>\n |
| Operating humidity<\/td>\n | 10 % to 90 % non-condensing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n <\/p>\n |